Rings with a March insignia
March Uk contracts Audere Innovative Firearm Accessories in Italy to put the March logo on an existing Audere ring.
March Scopes Canada® purchased those Audere rings inscribed with the March logo from March UK.
However, March UK has stated on July 10, 2023 :
“We only arranged and produced these for our own market to sell to our own sub dealers and end users.”
March Scopes Canada® is no longer granted access to purchase these rings.
Once our existing stock is sold we will no longer be able to make those rings available in Canada for March customers.
Please click HERE to see the DIMENSION and WEIGHT of the rings.
Please click HERE to see the INSTALLATION INSTRUCTIONS..
Please click HERE to see the TORQUE SPECIFICATIONS FOR MARCH RINGS
Torque conversion table Inch pounds to NM
- PC30H26 Picatinny – 30mm diameter ring / height:26mm (low) / 1.024" - 5.58 oz / 158 g
- 0 pc in stock. No longer available to March Scopes Canada®
- PC30H30 Picatinny – 30mm diameter ring / height:30mm (med) / 1.181" - 6.14 oz / 174 g
- 3 pc in stock $ 249.75
- PC30H34 Picatinny – 30mm diameter ring / height:34mm (high) / 1.339" -
- 2 pcs in stock $ 249.75
- PC30H37 Picatinny – 30mm diameter ring / height:37mm (extra high) / 1.457" - 7.13 oz / 202 g
- 2 pcs in stock $ 249.75
- PC34H30 Picatinny – 34mm diameter ring / height:30mm (med) / 1.181" - 5.86 oz / 166 g
- 0 pcs in stock No longer available to March Scopes Canada®
- PC34H34 Picatinny – 34mm diameter ring / height:34mm (high) / 1.339" -
- 0 pcs in stock No longer available to March Scopes Canada®
- PC34H37 Picatinny – 34mm diameter ring / height:37mm (extra high) / 1.457" - 6.85 oz / 194 g
- 1 pc in stock $ 249.75
THESE RINGS FIT STANDARD KELBLY STOLLE 3/8 DOVETAIL BENCH REST TYPE RAILS and European 11mm Anschutz rail.
- DT30H30 Dovetail – 30mm diameter ring / height:30mm (med) / 1.181" - 5.01 oz / 142 g
- Sold out. $249.75 each
- DT30H34 Dovetail – 30mm diameter ring / height:34mm (high) / 1.339" - 5.51 oz / 156 g
- 3 pcs in stock $249.75
- DT34H30 Dovetail – 34mm diameter ring / height:30mm (med) / 1.181" - 4.73 oz/ 134 g
- Sold out $249.75
- DT34H34 Dovetail – 34mm diameter ring / height:34mm (high) / 1.339 - 5.22 oz/ 148 g
- 2 pc in stock $249.75
RING HEIGHT CALCULATOR EXCEPTIONS
NOTE THE REAR IRON SIGHT IS ABOVE THE PICATINNY RAIL
DEON points out a few exceptions to be aware of that the ring calculator above does not consider in it's calculation.
When the OD diameter of the objective lens is smaller than the OD of the eye piece the zoom ring may hit the rail.
Also as in the above picture, this is a case where the rear sight may hit the eyepiece.
PROTOTYPE PICTURE ONLY!
ADD ACCESSORIES TO YOUR SCOPE .
ADDAPTER FOR PICATINNY RAIL
ADDAPTER FOR PICATINNY RAIL
ADDAPTER FOR PICATINNY RAIL
30mm and 34mm accessory top (single top only)
- AC-PC30 30MM .67 oz / 19 g $ 54.00
- 5 pcs IN STOCK
- AC-PC34 34MM .67 oz / 19 g $ 54.00
- 4 pc IN STOCK
PICATINNY RAIL TOP
ADDAPTER FOR PICATINNY RAIL
ADDAPTER FOR PICATINNY RAIL
Accessory picatinny rail
- AC-PR .60 oz / 17 g $ 84.00
- 4 pc IN STOCK
SHORTY UNI-Mount fits D8SV24FIML, D10SV24FIML, D10SV24FIMLN
Shorty custom Unimount is specially designed for March 1-8x24Shorty and 1-10x24Shorty Dual reticle
The tube diameter for these scopes slightly differ in the front (33mm) and at the rear (30mm).
You can place 2 rings or a single mount at the rear tube, but the test conducted by the actual ring manufacturer shows that POA will shift 1/2mil with a single mounting point.
With this unimount, shooters will be able to achieve higher levels of precision.
MS0001 $ 599.00 - 7.05 oz / 200 gm
In stock: 5 pcs
SHOWN WITHOUT ACCESSORIES
SHORTY UNI-Mount fits D8SV24FIML, D10SV24FIML, D10SV24FIMLN
March “Shorty” custom designed scope mount with one 30mm ring and one 33mm objective ring for 1-8×24
ACCESSORIES ARE SHOWN ABOVE
SHOWN WITH ACCESSORIES
11 mm RIMFIRE Dovetail RINGs (Fits Anschutz & 3/8 Stolle)
ANODIIZED RIMFIRE RINGS, SINGLE SCREW
ANODIIZED RIMFIRE RINGS, SINGLE SCREW
ANODIIZED RIMFIRE RINGS, SINGLE SCREW
No longer available from the Manufacturer
- 1 inch rings - 1.5 oz. - 1.0835" tall.
- 3 Pcs in stock $ 199.00
ANODIIZED RIMFIRE RINGS, DOUBLE SCREW
ANODIIZED RIMFIRE RINGS, SINGLE SCREW
ANODIIZED RIMFIRE RINGS, SINGLE SCREW
No longer available from the Manufacturer
- 30 mm rings - 4 oz - 1.1344" tall.
- 1 Pcs in stock $ 249.00
- 30 mm rings - 25 MOA - 4.5 oz - 1.3" Average Height.
- 1 Pcs in stock $ 269.00
march scope ACCESSORIES
FLIP CAPS
FLIP CAPS
FLIP CAPS
STOCK ITEMS
The March Telescope Flip Caps can be locked in a fully open position. Having the caps lay flat against the scope body prevents breakage and gives the shooter a better view of the target area from over the scope.
FC-41 Flip Cap for Standard Eyepiece Cap ID . 41mm/ 1.614" 8 pcs in stock
FC-46 Flip Cap for Wide Angle Eyepiece Cap ID . 46mm/ 1.811" 6 pcs in stock
FC-33 Flip Cap for 24mm objective model. Cap ID 33mm/ 1.299" 5 pcs in stock
FC-51 Flip Cap for 42mm objective model. Cap ID 51mm/ 2.008" 5 pcs in stock
FC-60 Flip Cap for 52mm objective model. Cap ID 60mm/ 2.362" 4 pcs in stock
FC-64 Flip Cap for 56mm objective model. Cap ID 64mm/ 2.520" 6 pcs in stock
All Flip Caps $ 20.00
------------------------------------------------------------------
MD DISK
FLIP CAPS
FLIP CAPS
STOCK ITEMS
MD Disk help to reduce the amount of light coming into a scope by up to 50%, depending on the conditions. This light reduction increases the scopes depth of field and, prehaps more impotantly for competition shooters, reduces the amount of seen mirage. Using a MD Disk at 60 or 80 power gives you a competitive advantage when the conditions turn bad and lets you see the target better than your competitor.
- DB740-0 MD Disk $43.00
For 42mm objective.
With MD disk attached, the inner diameter will be 30mm. Weight: 0.16 oz
In stock : 11 pcs
- DB062-0 MD Disk $ 43.00
For 52mm objective
With MD disk attached, the inner diameter will be 35mm. Weight: 0.25 oz (7.1 g)
In stock : 8 pcs
- DB269-0 MD Disk $ 64.00
For 56mm objective.
With MD disk attached, the inner diameter will be 43mm. Weight: 3/8 oz
In stock : 3 pcs
------------------------------------------------------------------
FAST LEVER
ANTI REFLECTIVE DEVICE
ANTI REFLECTIVE DEVICE
The Fast Lever helps move the zoom ring quickly and easily without the need to shift head position. Ideal for rapid fire disciplines on targets at multiple ranges.
- DA411-B Black Fast Lever $ 43.00
- 5 Pcs IN STOCK
- DB411-C Clear Fast Lever $ 43.00
- 1 Pc IN STOCK
Someone at the 2020 Shot Show mentioned that they thought the March fast lever, that is made of plastic, was not up to the high standard of a March Scope. Stuart Elliott from March Scopes Australia the distributor for Oceania, Asia & Africa pointed out that the engineers at March put a lot of thought into the design. Yes it may not look as fancy as an aluminum stud but it was designed that way to protect your scope. Other manufacturers have a aluminum stud or knob that is attached solidly to the eye piece of the scope. If a scope with that type of lever is dropped or banged and the stud is broken off, you will likely need to send the scope to the manufacturer to replace some of the scope's body parts; probably the eye piece and perhaps more. With the March fast lever if you break it; you just order another reasonably priced part and put it back on yourself.
ANTI REFLECTIVE DEVICE
ANTI REFLECTIVE DEVICE
ANTI REFLECTIVE DEVICE
STOCK ITEMS
Anti reflective device (ARD)
Objective models
- DB391-A ARD 24mm $138.00
- 2 Pcs IN STOCK
- DB391-B ARD 42mm $ 164.00
- 3 Pcs - IN STOCK
- DB391-C ARD 52mm $ 171.00
- 2 Pcs - IN STOCK
- DB391-D ARD 56mm $ 181.00
- 3 Pcs - IN STOCK
Sunshade
Leather Caps
Leather Caps
March Rifle Scopes can be ordered with extra three inch or 75mm (3 inch) long sunshades. These all-metal shades reduce stray light as well as decrease barrel flare and ghosting of the target.
IN STOCK
- DB485-0 Sunshade $ 57.00
- for 24MM objective models
- In stock: 3 Pcs
- 2-DB179-0 Sunshade $ 64.00
- for 42mm objective models
- In stock: 2 Pcs
- 2-DB115-0 Sunshade $ 88.00
- for 52mm objective models
- In stock: 2 Pcs
- 2-DB256-0 Sunshade $ 95.00
- for 56mm objective models
- In stock: 2 Pcs
- 2-DB256-G Sunshade $ 114.00
- New dark gray, to match the colour of the 8-80x56 Majesta model.
- 5 Pcs in stock
SPECIAL ORDER ITEM
- 2-DB115-S Sunshade $ 81.00
- for 52mm obj. (Silver models)
- 2-DB256-S Sunshade $ 90.00
- for 56mm obj. (Silver models)
Leather Caps
Leather Caps
Leather Caps
ALL CAPS IN STOCK
March offers optional Leather Caps that not only protect your valuable new scope but also provides a traditional look to a modern piece of optical art.
- LC-24 $55.00
- 3 Pcs in stock
- Leather Caps for 24mm objective models: D10V24, D10V24M, D10V24T, D10V24TM, D10V24TI, D8V24FML, D8V24FIML
- LC-42 $57.00
- 3 Pcs in stock
- Leather Caps for 42mm objective models: D25V42, D25V42M, D25V42T, D25V42TM, D25V42TI, D24V42FML, D24V42FIML, D24V42FMA, D24V42FIML
- LC-52 $69.00
- 4 Pcs in stock
- Leather Caps for 52mm objective models: D40F52, D50F52, D60F52, D32V52L, D32V52LM, D32V52T, D32V52TM, D32V52TI, D60V52L, D60V52LM, D60V52T,D60V52TM, D60V52TI
This does not fit the eyepiece of D28HV52WFIML, D28HV52WFML
- LC-56 $74.00
- 1 Pc in stock. 2 pcs arrives about Dec. 9 [126]
- Leather Caps for 56mm objective models : D50V56T, D50V56TM, D50V56TI, D60HV56TI, D60HV56T, D60HV56TM, D60HV56L, D60HV56LM, D80V56T, D80V56TM, D80V56TI, D40V56FML(G2), D40V56FIML(G2), D40V56FML10(G2), D40V56FIML10(G2),D40V56FMA4, D40V56FMA8(G2), D40V56FIMA4, D40V56FIMA8(G2), D60V56GFIML, D60V56GFIML10, D60V56GFIMA, D60V56GFML, D60V56GFML10, D60V56GFMA
This does not fit the eyepiece of D42HV56WFIML
- LC-56W $83.00
- 2 Pcs in Stock
- Leather Caps for 56mm wide angle objective models:
D42HV56WFIML, D42HV56WFIMA,
D80HV56WTIMLX-GR, D80HV56WTIX-GR
THE PRICE INCLUDES BOTH CAPS
Choose the illumination switch that suits you
Brightness Levels and picture of discontinued switch
Brightness Levels and picture of discontinued switch
Brightness Levels and picture of discontinued switch
Illumination Brightness Level for each Type of Switch is shown below.
Low and Standard switches have 4 intensity selections only.
Six level switch will have all the Six brightness levels from
1% to 100%.
Low 1% 4% 10% 20% .
Standard 10% 20% 40% 100%
Six Level 1% 4% 10% 20% 40% 100%
Six level Illumination Switch
- The Six Level Illumination Switch produces six different levels of light intensity on the reticle. This feature is useful for precision shooting in low light or night conditions.
Rotating the knurled dial increases the intensity to the next level.
The rubber switch turns illumination on or off while maintaining the user-selected intensity level.
After one hour, illumination will automatically shut off to save battery life.
Still available Discontinued Illumination switch
DA381-0 Six Level Illumin. Switch $287.00
- 2 Pcs in stock
_________________________________
New 6 level Illumination Switch Module
Brightness Levels and picture of discontinued switch
Brightness Levels and picture of discontinued switch
Picture of the New Style 6 Level Switch
The Six Level Illumination Switch produces six different levels of light intensity on the reticle. This feature is useful for precision shooting in low light or night conditions. Rotating the knurled dial doubles the intensity with each increasing level. The rubber switch turns illumination on or off while maintaining the user-selected intensity level. After one hour, illumination will automatically shut off to save battery life.
The New Six Level Illumination Switch is now installed in all models.
You can alternately request that I change it to the four level switch or the older model 6 level switch while stock lasts.
If you want to change the illuminated module on your present scope; you can purchase any of the switches as an accessory and easily install it yourself in a few minutes without any tools.
Accessory
DA656-0 New Six Level Illumin. Switch $309.00
- 11 Pcs in stock
___________________________________
Middle Focus Wheel
Accessory Illumination Switch Modules
Accessory Illumination Switch Modules
STOCK ITEMS
To help with fine or rapid focus changes at different distances, March scopes can be upgraded using a 49mm / 1.93 inch diameter Middle Focus Wheel.
2-DB340-0 Middle Focus Wheel
$ 64.00
- 5 Pcs in stock
- For ALL Fixed Power Models, the EP Zoom Model, and the non-illuminated models D60V52L & D60V52LM (10x-60x52mm)
- (inner diameter 31mm)
2-DB341-0 Middle Focus Wheel
$ 64.00
- 5 Pcs in stock. 6 pcs arrives about Dec. 9 [126]
- For Non-illuminated models of 1x-4.5x, 1x-10x, 2.5x-25x, 5x-50x, 8x-80x, 1x-8x, 3x-24x, 5x-40x, 10x-60x56, 4.5-28x52, 6-60x56 Genesis
- (inner diameter 34mm)
2-DB342-0 Middle Focus Wheel
$ 64.00
- 10 Pcs - In stock
- For illuminated models of 1x-4.5x, 1x-10x, 1.5x-15x, 2.5x-25x, 5x-50x, 8x-80x, 1x-8x, 3x-24x, 5x-40x, 10x-60×56, 4.5-28×52, 4-40×52, 6-60×56 Genesis
- For New 1-10x24 shorty, 1.5-15x42 FFP, 4.5-28x52 all with shuriken locks
- (inner diameter 36mm)
2-DB729-0 Middle Focus Wheel
$ 64.00
- 6 Pcs - In stock
- For illuminated models of 5-42x56
- For New 5-42x56 Genll
- For 8-80x56 High Master Wide Angle scope
- (inner diameter 39mm)
_____________________________________
Accessory Illumination Switch Modules
Accessory Illumination Switch Modules
Accessory Illumination Switch Modules
ULTRA LOW ILLUMINATION MODULE
Depending on your needs, the normal illumination switch that comes standard on your scope may be too bright. March offers an Ultra Low Power Illumination Switch that works with night vision.
https://marchscopes.com/news/8813/
When the night vision is attached on the objective lens, brightness "1" or "2" on the 6 level illumination will be dark enough.
However, if the night vision is attached to the eyepiece, "1" or "2" on the 6 level illumination will be too bright and the illumination module will not be usable. March designed the Ultra Low Power Illumination Module, with the appropriate level of illumination on "1" and "2" , to go with this type of night vision.
The 4 level and the ultra low Illumination Switches are operated by pushing the center rubber button. When in the off position; one push of the button turns it on to the lowest setting, each additional 3 pushes of the button increases the intensity of the illumination. If you push the button again it will turn the illumination off. The next push of the button will again turn it back on and the same scenario will occur.
Ultra Low illumination Switch
DA233-UL $ 286.00
2 Pcs - In stock .
Four level illumination Switch
DA233-H $262.00
1 Pc - In stock
_______________________________________
Large Focus Wheel
Detailed Windage Dial
Detailed Windage Dial
Stock ITEMs
Large Wheel
Shooting at very close ranges often requires very fine adjustment of the focus dial. March has produced a Large Wheel to fit over the Middle Focus wheel to enhance the dial’s ability to focus clearly. A great addition to Air Rifle Field Target and other close range rifle disciplines.
2-DB343-0 (3.5inch / 8.89cm) Large Wheel $107.00
- 3 pcs - In stock
2-DB402-0 (4.5inch / 11.4cm) Large Wheel $129.00
- 1 pc - In stock
Detailed Windage Dial
Detailed Windage Dial
Detailed Windage Dial
SPECIAL ORDER ITEM
Windage Dial
This Windage Dial reverses the standard dial on the scope so that now with this turret left wind is on the left and right wind is on the right, allowing shooters to instinctively cope with quick wind changes.
DB209-H Detailed Windage Dial $ 55.00
- 2 pcs - In stock
Large elevation Dials
Stock Items
3 March offers two blank dials for shooters to create their own Ballistic Drop Compensator (BDC). These blank BDCs replace the existing elevation knob on your March scope and let you create your own elevation adjustments to suit your load. Make any changes to your load and replace the tape on the dial quickly and easily. The blank dials can also be used for air rifle field events in conjunction with the Large Wheel for added accuracy at short ranges.
- Adhesive tape is enclosed with the large dial.
- You can write on the tape by pencil or pen to make your own scale.
- Please click HERE to see how to install a large dial.
- DB392-0 Is the shorter dial in the picture.
- Fits on tactical turrets only.
- Fits only these scopes:
- 1x-4.5x, 1x-8x, 1x-10x, 1.5-15x, 2.5x-25x,, 3x-24x, 5x-40x
- Does not fit locking turret model 5x-40x Genll
- IN STOCK : 2 Pcs $ 55.00
- DB393-0 Is the taller dial that is displayed.
- Fits on tactical turrets only
- Fits only these scopes:
- 5x-32x, 5x-50x, 8x-80x, 10x-60x
- IN STOCK : 2 Pcs $ 88.00
- DB739-A
- Comes with 4.5-28x52 scope
- Fits over tactical turret
- Replacement part for 4.5-28 x 52mm
- Special order: $ 88.00
EYEPIECE RUBBER SHOWN INSTALLED ON THE SCOPE
DB499-0 EYEPIECE RUBBER $26.00
3 pc - In stock
Fits All Standard Eye pieces
DOES NOT FIT SCOPES THAT HAVE THE NEW WIDE ANGLE EYE PIECE: 5-42×56 and 4.5-28×52
smart phone adapter
Camera attached to the scope
Camera attached to the scope
STOCK ITEM
Use the Smart Phone Adapter to take photos through your March Rifle Scope. The adapter can be adjusted to suit most current Smart Phones. Do not use while shooting.
DA367-0 SMART PHONE ADAPTER $ 362.00 - 1 pc in stock
📷Warning!
DO NOT SHOOT with the Smart Phone Adapter installed on your March Rifle Scope. No warranty for any damage to your Smart Phone if the Smart Phone Adapter is used while shooting.
Camera attached to the scope
Camera attached to the scope
Camera attached to the scope
Adapter threads into the eye piece of the scope
Spotting Scope Accessories
SPECIAL OREDER ITEM $ 384.75
TURN YOUR RIFLE SCOPE INTO A SPOTTING SCOPE
Click below to GO to ACCESSORIES on the Manufacture's SITE