D42HV56WFIML (FFP • Tactical • Locking turrets)
March-FX 5-42x56mm Wide Angle • Illuminated MIL Reticle
This 5-42x56mm scope is developed for serious competition shooters, enthusiasts and hunters who demand the utmost in optical/mechanical performance. The March-FX 5-42x56mm Wide Angle has the widest angle eyepiece among all March Scopes 26° (30% more than our standard models) offering enhanced FOV throughout the 8.4x magnification range.
- 8.4X Zoom
- FFP FML-3 and FML-MT MIL Reticles
- 6 level illumination module
- 1 Click Adjustment = 0.1 MIL
- 34mm diameter body
- 56mm objective lens
- Wide Angle eyepiece : 26°
- Fast focus eyepiece
- High Master lens system (Super ED lenses)
- Temperature Anti-Drift Lens System
- Top quality multi lens coating where the transmittance is very near 100%
- Water repellent lens coating
- Side focus 10 yard - infinity
- Scope body fully machined from aluminum ingot
- All Japanese metal parts with no plastic part except for minimum essentials such as an insulator
- Argon gas filled for internal stability
- Lockable Elevation / Windage / Side focus turrets
Multi-turn 10 MIL elevation turret with 40 MIL total travel adjustment for ELR. Locking elevation, windage and parallax with easy zero stop. Fast focus diopter system will enable you to adjust from -2D to +2D in 1 revolution. Eyepiece diopter can be rapidly adjusted.
March-FX 5-42x56mm Wide Angle employs "Temperature Anti-Drift Lens System" and the "High Master lens system".
Temperature Anti-Drift Lens System
In the latest optical systems, a new lens material has been developed to accommodate changes in environmental temperature by altering the refractive index of the lenses. This new lens material has been adopted to create a more stable lens system that naturally adapts to changes in temperature to maintain focus and clarity over a wide range of conditions.
Super ED lenses
Super ED lenses are an improved ED lens element with optical characteristics even closer to pure fluorite crystal lens elements. By incorporating Super ED lenses (High Master lens system), we are able to reduce the chromatic aberration.
* Manufacturer's Note:
Because of the very wide adjustment range of this riflescope, you may experience some image quality degradation as you near the limits of the adjustment range. This can occur because of the extreme refraction of the incoming light at the edges of the objective lens. This degradation will worsen as the magnification increases but if you readjust the focus turret each time, you will be able to see the image clearly. In case you do not wish to adjust each time, we recommend using an appropriate canted rail if you plan to use this riflescope consistently near the limits of the adjustment range and at higher magnification. It can be utilized to gain additional elevation and to keep the scope optically centered as much as possible. Please check our Support page for further information. https://marchscopes.com/support/
If you are looking for a scope with large elevation travel amount and perfect IQ throughout the range, we recommend you 6-60x56Genesis (114MIL, 400MOA) and 4-40x52 (86MIL, 300MOA) Genesis scopes. When you turn the elevation or windage turret on the Genesis, the entire riflescope tube is canted. This unique design allows you to always look through the central part of the lens resulting in perfect image quality, regardless of the windage or elevation applied to the riflescope. (Link to the product pages of 6-60x56 Genesis: https://marchscopes.com/scopes/d60v56gfiml-2/, 4-40x52: Genesis https://marchscopes.com/scopes/d40v52gfiml-3/)
March-FX 5-42x56mm Wide Angle MIL Dials
0.1 MIL Type Dials
- 1 Click Adjustment : 0.1MIL (1cm @100m)
- 10 MIL turret revolution (100cm @100m)
- 0-set on Elevation turret
In case sand may get into the locking lever, you can wash it away as the scope is waterproof.
FML-TR1 MIL Reticle
FML-TR1 MIL Reticle
New competition oriented First Focal Plane reticle is designed for precise holdover without obscuring the sight picture. If you misread distance and/or wind slightly and you are shooting under time pressure and have to hold off with the reticle slightly, it is nice to have an offset reference rather than just a bunch of open space. It also provides an immediate reference point if you need to figure out how far off you are based on the bullet impact.
Central dot and cross are illuminated with 0.2 mrad and 0.5 mrad hash marks throughout.
The four dots around the center provide small visual references for quick shot corrections. They are located 0.5 mrad away from the centre both vertically and horizontally.
FML-3 MIL Reticle
FML-3 MIL Reticle
New competition oriented First Focal Plane reticle is designed for precise holdover without obscuring the sight picture. If you misread distance and/or wind slightly and you are shooting under time pressure and have to hold off with the reticle slightly, it is nice to have an offset reference rather than just a bunch of open space. It also provides an immediate reference point if you need to figure out how far off you are based on the bullet impact.
Central dot and cross are illuminated with 0.2 mrad and 0.5 mrad hash marks throughout.
The four dots around the center provide small visual references for quick shot corrections. They are located 0.5 mrad away from the center both vertically and horizontally.
Subtension is the same as on the FML-TR1 reticle but without the tree part.
FML-MT MIL Reticle
FML-MT MIL Reticle
New competition oriented First Focal Plane reticle is designed for precise holdover without obscuring the sight picture. Thickness of the main lines is 0.02mil.
March-FX 5-42x56mm in MIL FFP Wide Angle Technical Data
